型號 封裝 在線定購
LPC1764FBD100(查看) LQFP100


技術資料—— LPC1764 PDF技術資料
LPC1764 參數
LPC1764 存儲器
Flash (KB) 128
RAM (kB) 32
LPC1764 其他參數
fmax (MHz) 100
I/Opins 70
I2C 3
I2S -
定時器 6
I/O 電壓 (V) 3.3
CPU 電壓 (V) 3.3
LPC1764 封裝與引腳

LPC1764 概述

The LPC1764 are ARM Cortex-M3 based microcontrollers for embedded applications featuring a high level of integration and low power consumption. The ARM Cortex-M3 is a next generation core that offers system enhancements such as enhanced debug features and a higher level of support block integration

The LPC1764 operate at CPU frequencies of up to 100 MHz. The ARM Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The ARM Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching

LPC1764 特性

  • ARM Cortex-M3 processor, running at frequencies of up to 100 MHz
  • ARM Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
  • Up to 128 kB on-chip flash programming memory
  • Up to 32 kB of SRAM
  • In-System Programming (ISP) and In-Application Programming (IAP)
  • Eight channel General Purpose DMA controller (GPDMA)
  • Ethernet MAC with RMII interface and dedicated DMA controller
  • USB 2.0 full-speed device/Host/OTG controller
  • Four UARTs with fractional baud rate generation, internal FIFO, and DMA support
  • CAN 2.0B controller with two channels
  • SPI controller with synchronous, serial, full duplex communication
  • Two SSP controllers with FIFO and multi-protocol capabilities
  • Three enhanced I2C bus interfaces
  • 70 General Purpose I/O (GPIO) pins with configurable pull-up/down resistors
  • 12-bit/8-ch Analog/Digital Converter (ADC) with conversion rates up to 200 kHz
  • Four general purpose timers/counters
  • One motor control PWM with support for three-phase motor control
  • Quadrature encoder interface that can monitor one external quadrature encoder
  • One standard PWM/timer block with external count input
  • Low power RTC with a separate power domain and dedicated oscillator
  • WatchDog Timer (WDT)
  • ARM Cortex-M3 system tick timer, including an external clock input option
  • Repetitive interrupt timer provides programmable and repeating timed interrupts
  • Each peripheral has its own clock divider for further power savings
  • Standard JTAG test/debug interface
  • Integrated PMU (Power Management Unit)
  • Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deep power-down
  • Single 3.3 V power supply (2.4 V to 3.6 V)
  • Four external interrupt inputs configurable as edge/level sensitive

1分快3稳赚规律 舍伍德的罗宾 手机幸运农场下载不了 捕鱼来了论坛 广西十三张棋牌下载 贵阳捉鸡麻将冲锋鸡 上海十一选五360走势图 河南22选5开奖好运3 10倍杠杆配资 友乐广西麻将安卓版 中超预备队 澳洲幸运8是什么彩票 天空棋牌游戏中心? 体彩p3杀号绝招 浙江十一选五基本走 黑龙江省36选七的开奖号码