LPC2368

芯片信息

型號 封裝 在線定購
LPC2368FBD100(查看) LQFP100

引腳布局

(點擊圖片看大圖)
技術資料—— LPC2368 PDF技術資料

LPC2368 概述

The LPC2368 microcontroller is based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with 512 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical performance in interrupt service routines and DSP algorithms, this increases performance up to 30 pct over Thumb mode. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 pct with minimal performance penalty.

The LPC2368 is ideal for multi-purpose serial communication applications. It incorporates a 10/100 Ethernet Media Access Controller (MAC), USB full speed device with 4 kB of endpoint RAM, four UARTs, two CAN channels, an SPI interface, two Synchronous Serial Ports (SSP), three I2C interfaces, and an I2S interface. This blend of serial communications interfaces combined with an on-chip 4 MHz internal oscillator, SRAM of up to 32 kB, 16 kB SRAM for Ethernet, 8 kB SRAM for USB and general purpose use, together with 2 kB battery powered SRAM make the LPC2368 very well suited for communication gateways and protocol converters. Various 32-bit timers, an improved 10-bit ADC, 10-bit DAC, one PWM unit, a CAN control unit, and up to 70 fast GPIO lines with up to 12 edge or level sensitive external interrupt pins make the LPC2368 particularly suitable for industrial control and medical systems.

LPC2368 參數
LPC2368 存儲器
FLASH (kB) 512
RAM (kB) 58
LPC2368 性能參數
fmax (MHz) 72
I/Opins 70
UART 4
I²C 3
I²S 1
SPI 1
SSP 2
ADC 6
DAC 1
定時器 4
PWM 6
I/O 電壓 (V) 3.3
CPU 電壓 (V) 3.3
LPC2368 封裝與引腳
LQFP100



今天上海时时乐开奖号
河北11选5走势 上海选四历史开奖号 下载幸运快三官网 11选5今天开奖结 江苏七星麻将app 美人捕鱼单机游戏 闲来浙江麻将 捕鱼大富翁送红包 江西快3遗漏数据一定牛 可以打长沙麻将的app 甘肃十一选五官网 大发pk10计划走势图 全来湖南麻将官网 股票融资杠杆是多少 下载游戏棋牌? 极速飞艇