型號 封裝 在線定購
LPC2468FBD208(查看) LQFP208


技術資料—— LPC2468 PDF技術資料

LPC2468 概述

NXP Semiconductors designed the LPC2468 microcontroller around a 16-bit/32-bit ARM7TDMI-S CPU core with real-time debug interfaces that include both JTAG and embedded trace. The LPC2468 has 512 kB of on-chip high-speed flash memory. This flash memory includes a special 128-bit wide memory interface and accelerator architecture that enables the CPU to execute sequential instructions from flash memory at the maximum 72 MHz system clock rate. This feature is available only on the LPC2000 ARM microcontroller family of products. The LPC2468 can execute both 32-bit ARM and 16-bit Thumb instructions. Support for the two instruction sets means engineers can choose to optimize their application for either performance or code size at the sub-routine level. When the core executes instructions in Thumb state it can reduce code size by more than 30 pct with only a small loss in performance while executing instructions in ARM state maximizes core performance.

The LPC2468 microcontroller is ideal for multipurpose communication applications. It incorporates a 10/100 Ethernet Media Access Controller (MAC), a USB full-speed Device/Host/OTG Controller with 4 kB of endpoint RAM, four UARTs, two Controller Area Network (CAN) channels, an SPI interface, two Synchronous Serial Ports (SSP), three I2C interfaces, and an I2S interface. Supporting this collection of serial communications interfaces are the following feature components; an on-chip 4 MHz internal precision oscillator, 98 kB of total RAM consisting of 64 kB of local SRAM, 16 kB SRAM for Ethernet, 16 kB SRAM for general purpose DMA, 2 kB of battery powered SRAM, and an External Memory Controller (EMC). These features make the LPC2468 optimally suited for communication gateways and protocol converters. Complementing the many serial communication controllers, versatile clocking capabilities, and memory features are various 32-bit timers, an improved 10-bit ADC, 10-bit DAC, two PWM units, four external interrupt pins, and up to 160 fast GPIO lines. The LPC2468 connects 64 of the GPIO pins to the hardware based Vector Interrupt Controller (VIC) that means these external inputs can generate edge-triggered interrupts. All of these features make the LPC2468 particularly suitable for industrial control and medical systems.

LPC2468 參數
LPC2468 存儲器
FLASH (kB) 512
RAM (kB) 98
LPC2468 性能參數
fmax (MHz) 72
I/Opins 160
I²C 3
I²S 1
定時器 4
PWM 12
I/O 電壓 (V) 3.3
CPU 電壓 (V) 3.3
LPC2468 封裝與引腳

腾讯体育比分直播 快3计划软件 广东南粵36选7走 广西棋牌下载? 河北20选5基本走势带坐标 股票历史走势 广西新快3开奖号码 sg赛车开奖号 cba比分结果昨天 四人麻将免费下载 河北快三跨度和值表 10分11选5开奖 31选7走势图 二人麻将棋牌平台 如何开通股票账户 宝博炸金花安卓版下载